GT
Marketing -
AnterioRest Arden02
Introductory Price Ends Soon!
Call 1-866-704-8455 for details.
The AnterioRest® Support
The AnterioRest is a revolutionary approach to
the prevention and treatment of lower back injury. The concept
of Back Support From the Front® applies research
findings which suggest that anterior support is far more
effective than posterior support in reducing muscle stress in
an inclined position.
The AnterioRest attaches to the back of the patient chair
and terminates in a small cushion against which the
practitioner leans, thus freeing arms and hands for stress
free manipulation of instruments. The supporting arms can be
moved through a full range of motion, accommodating all
treatment positions for right or left handed users. The
optional dual mount installation attaches two AnterioRests to
the back of the patient chair providing support for both the
dentist and assistant during four-handed procedures. The
AnterioRest has been instrumental in alleviating back, neck,
and extremity pain, helping many users return to comfortable
living and productivity.
Click the following for printable documents!
 AnterioRest Features
The AnterioRest
provides maximum flexibility in a very efficient, streamlined
package. It is ruggedly constructed out of powder-coated
steel, aircraft grade aluminum, synthetic leather, phenolic
polymer, and polyurethane.
The AnterioRest has been designed and precision engineered
to provide you with the most versatile ergonomic solution
available for dental career-related back pain.
A. Mounting Plate
The
Mounting Plate attaches to the back of the patient chair which
provides a stabilizing anchor for the AnterioRest. The
AnterioRest can then be positioned to provide support for the
entire trunk and upper body, alleviating muscle effort.
Universal mounting systems are available for most chair models
including a dual mount option that secures two AnterioRests to
the back of the patient chair. Installation is straightforward
using basic tools. Pictured above is the direct mounting plate
option for certain types of metal-backed chairs.
B. Lower Arm
The Lower Arm is
attached to the Mounting Plate by a ball joint and it provides
the extension necessary to work on any side of the patient
chair. The Lower Arm can freely move into any clock position
(9 through 3 o’clock), move up and down, and rotate 360° on
its axis. The movement of the Lower Arm is controlled by the
centrally located Control Knob (F).
C. Elbow Pivot
The Elbow Pivot
connects the Lower Arm to the Upper Arm. The Upper Arm can
swing 360° at this center point. In general terms, this is the
point where the horizontal positioning of the Lower Arm
transitions to the vertical positioning of the Upper Arm. The
pivoting motion is controlled by the centrally located Control
Knob (F). Back
D. Upper Arm
The Upper Arm
provides the vertical extension for the Chest Pad. It is
attached to the Chest Pad metal plate by a smaller ball joint.
The Upper Arm can pivot 360° as described above. The ball
joint at the end of the arm allows the Chest Pad to rotate
360° on its axis and vertically pan the face of the pad up or
down. The movement of the Upper Arm is controlled by the
centrally located Control Knob (F). Back
E. Chest Pad
The cushioned pad
supported by a metal plate provides a comfortable front rest
for the practitioner. The practitioner rests against this pad
when leaning forward to work on the patient. The slim profile
of the Chest Pad and ball joint allows the practitioner to
“get in close” to the patient. Back
F. Control Knob
This centrally
located knob unlocks all planes of movement of the
AnterioRest. This single point locking knob allows the device
to be moved in one motion from one side of the patient chair
to the other while allowing simultaneous fine adjustment of
the Chest Pad for optimum comfort. The operator can maneuver
the Chest Pad and Arms into virtually any configuration or
desired position simply by releasing the Control Knob and
moving the pad. Back
| Dimensions: |
|
Length: 30” max. (mounting
plate to pad) |
|
Width: 7” or 9” (breadth of
pad) |
|
Height: 13” (upper arm to top
of pad) |
|
Weight: 10 lbs. (4 kg) |
|
Pad: 5” x 7” oval or 3” x 9”
rectangle |
|
|
| Materials: |
|
Powder Coated Steel and Aircraft
Grade Aluminum, Synthetic Leather, Phenolic
Polymer |
|
|
| Adjustments: |
|
Three pivoting joints allow the upper
and lower arms and chest plate to swivel into virtually
any configuration. This enables the operator to place
the chest pad into their preferred position. All joints
are locked into place by one centrally located
knob. |
|
Lower Arm:13” of horizontal
extension |
|
Upper Arm: 10” of vertical
extension |
|
|
| Mounting: |
|
Secured to back of patient chair via
specially designed mounting plate |
|
|
| Cleaning: |
|
Standard solution wipedown |
|
|
|
|
 |
|
Back
Pad Colors
|
|
When ordering, please specify color choice by number:
Raven Wing - 001
Dove Grey - 002
Papyrus - 003
Baltic - 004
Juniper - 005
|
TOP |
